Powerfun 120A ESC 3S~8S LiPo Brushless Motor Speed Controller XT60 Connector BEC 5V 10A ESC for RC Plane Drone Car Airplane Overheat Protection

Powerfun 120A ESC is a brushless motor electronic speed controller designed for RC models such as drones, RC cars, RC airplane. With high-efficiency circuitry, It's compatible with most brushless motors, offering precise power control and multiple safety protections. It's ideal for hobbyists and competitive racers.Technical SpecificationsInput Voltage: 3-8S lithium battery (11.1V-33.6V) Continuous/ Peak Current: 120A / 150A (instantaneous) BEC Output: 5V/10A (linear voltage regulation) Connector Type: XT60 (input) + 3.5mm banana plug (output) Dimensions: 83mm × 35mm × 22mm (L×W×H) Weight: 117g (lightweight design) Operating Temperature Range: -20℃ - 80℃Model Types: Quadcopters, RC off-road cars, racing boat models, FPV racing drones, etc. Remote Control Systems: Mainstream brands like FrSky, Flysky, Futaba, etc. Installation and SetupConnection Steps: Connect the XT60 connector to the battery and the banana plug to the motor's three-phase wires. Insert the receiver signal wire into the ESC's PWM port. After powering on, calibrate the throttle travel via the remote control (follow the manual for specific steps). Safety Tips: Remove the propeller or disconnect the motor drive during initial debugging. Avoid metal short circuits or prolonged overload operation. NotesDo not exceed the rated voltage (8S) to avoid damaging the ESC. Regularly check the heat sink and wire connections to ensure good ventilation. It is recommended to use silicone wires of 30AWG or higher to reduce resistance. Package ContentsPowerfun 120A ESC ×13.5mm banana plug connection wire ×1 setChinese and English manual ×1

• Flexible Programming: Supports LED programming card for setting parameters such as braking, battery type, low voltage protection mode, startup mode, and search mode, meeting various user needs
• High Compatibility: Supports 3-8S lithium batteries (up to 33.6V input), compatible with brushless motors, suitable for drones, RC cars, and RC airplane. Maximum continuous current 120A (peak current 150A), suitable for a wide range of motor power (e.g., 2-4 pole brushless motors),meeting high-performance power requirements, handling high-speed racing and high-load scenarios effortlessly
• Multiple Protection Features: Includes input startup protection, throttle signal loss protection, stall protection, temperature protection, low voltage protection, overcurrent protection, and power-on voltage anomaly protection, effectively extending device and battery life. Made with high-temperature-resistant PCB and excellent heat dissipation design, operating temperature range -20°C to 80°C
• Built-in BEC Power Supply: Integrates 5V/10A BEC output to directly power receivers, servos, etc., eliminating the need for additional batteries, simplifying wiring, and reducing overall weight. Supports standard PWM signal input (50Hz) with quick calibration; equipped with XT60 connector and 3.5mm banana plug, compatible with mainstream motors and batteries for easy installation
• High Quality and Cost-Effective: Uses original, high-quality components to ensure excellent performance and stability, providing reliable power for your models. Rich in features and reasonably priced, ideal for both beginners and professionals